Global Green Chemicals (GGC) in Thailand applied THERMAL-XR® graphene coating to its air-cooled chiller and measured a 12.88% reduction in energy use, translating to an estimated saving of 653,927 THB per year and a return on investment of under 2 years.
Case at a glance
| Customer | Global Green Chemicals (GGC) |
|---|---|
| Location | Thailand |
| Equipment | Air-Cooled Chiller |
| Brand | Daikin |
| Capacity | 130 tons |
| Model | EWAD380D |
| Equipment age | under 5 years |
| Energy savings | 12.88% |
| Annual cost saving | 653,927 THB/year |
| Return on investment | < 2 years |
Background
Air conditioning and chiller systems are among the largest electricity users on an industrial site. Over time, condenser coils lose heat transfer efficiency, which forces compressors to work harder and increases energy consumption. At GGC, the air-cooled chiller is a Daikin unit with a capacity of 130 tons, and it has been in service for under 5 years.
The solution: THERMAL-XR®
THERMAL-XR® is a graphene-enhanced coating from Graphene Manufacturing Group (GMG), designed to deliver superior heat transfer and protection for heat exchanger coils. The coating was spray-applied to the coils of the air-cooled chiller, with no change to the equipment itself.
Results
Energy use was compared before and after coating:
- Electricity usage: 1,627 kWh/day before coating vs 1,224 kWh/day after
- Electricity cost: 219,645 THB/month before coating vs 165,151 THB/month after
- Carbon emissions: 265 tons CO2/year before coating vs 199 tons CO2/year after
- Annual saving: 653,927 THB per year
- ROI: < 2 years
These results equal an energy saving of 12.88%.
Takeaway
The GGC case shows that coating existing air-cooled chillers can lower energy consumption and electricity costs without replacing equipment, even on units that have been running for under 5 years.
Want similar results at your site?
Get in touch with GMG to discuss your cooling equipment, or find a THERMAL-XR® applicator near you.
- Email: [email protected]
- Phone: +61 7 3063 6638
- Find an applicator: graphenemg.com/graphene-products/THERMAL-XR®/find-an-applicator
Measured energy savings presented in this case study are not predictors of future installation results. Estimated savings should be considered as estimates. Standard GMG disclaimer applies. All contents copyright © Graphene Manufacturing Group Ltd. All rights reserved.