Wannaprapai International Co., Ltd. (WPI) in Thailand applied THERMAL-XR® graphene coating to five split-type air conditioners and measured an 11.60% reduction in energy use, translating to an estimated saving of 228,156 THB per year and a return on investment of under 2 years.
Case at a glance
| Customer | Wannaprapai International Co., Ltd. (WPI) |
|---|---|
| Location | Thailand |
| Site type | Flexible packaging factory |
| Equipment | Split-Type Air Conditioner |
| Brand | Trane |
| Capacity | 240,000 BTU x 5 sets |
| Model | TTA240JD00RC |
| Equipment age | 13 years |
| Energy savings | 11.60% |
| Annual cost saving | 228,156 THB/year |
| Return on investment | < 2 years |
Background
Air conditioning and chiller systems are among the largest electricity users on an industrial site. Over time, condenser coils lose heat transfer efficiency, which forces compressors to work harder and increases energy consumption. At WPI, the split-type air conditioners are five Trane units, each with a capacity of 240,000 BTU, and they have been in service for 13 years.
The solution: THERMAL-XR®
THERMAL-XR® is a graphene-enhanced coating from Graphene Manufacturing Group (GMG), designed to deliver superior heat transfer and protection for heat exchanger coils. The coating was spray-applied to the coils of all five split-type air conditioners, with no change to the equipment itself.
Results
Energy use was compared before and after coating:
- Electricity usage: 1,150 kWh/day before coating vs 1,016 kWh/day after
- Electricity cost: 163,905 THB/month before coating vs 144,892 THB/month after
- Carbon emissions: 187 tons CO2/year before coating vs 166 tons CO2/year after
- Annual saving: 228,156 THB per year
- ROI: < 2 years
These results equal an energy saving of 11.60%.
Takeaway
The WPI case shows that coating existing split-type air conditioners can lower energy consumption and electricity costs without replacing equipment, even on large-capacity units that have been running for 13 years.
Want similar results at your site?
Get in touch with GMG to discuss your cooling equipment, or find a THERMAL-XR® applicator near you.
- Email: [email protected]
- Phone: +61 7 3063 6638
- Find an applicator: graphenemg.com/graphene-products/THERMAL-XR®/find-an-applicator
Measured energy savings presented in this case study are not predictors of future installation results. Estimated savings should be considered as estimates. Standard GMG disclaimer applies. All contents copyright © Graphene Manufacturing Group Ltd. All rights reserved.